Apollo Sticker Film Triple-Screen Controller 101227 2154440 FILM For W2000 W2100 Milling Parts

Die-cut Apollo sticker film for W2000 / W2100 milling machines — part numbers 101227, 2082170, 2154440 and 2478077

• Coolant and oil tolerant surface — mist and hydraulic splash wipe off without softening the film or lifting the print.
• Matte anti-glare finish — cuts the reflection that washes out the three displays under overhead shop lighting.
• UV-stabilised polymer — resists the yellowing that turns a clear overlay cloudy after a season in a sunny cab.
• Precision die-cut outline — key window openings and screen apertures follow the controller layout, so nothing needs trimming with a blade.
• Residue-free removal — the adhesive releases in one piece when the film is replaced, leaving no glue to scrape off the panel.
• Four cross-referenced numbers — 101227, 2082170, 2154440 and 2478077 are printed on the backing for verification before fitting.

1. Park the machine, switch off the controller and let the panel cool to room temperature.
2. Wipe the panel with a lint-free cloth and a mild cleaner; let it dry completely, since trapped moisture is what creates bubbles.
3. Peel a short strip of the backing away and align the three screen apertures first — the key windows then fall into place.
4. Lay the film down from the centre outward, smoothing with a soft squeegee to push air to the edges.
5. Run a finger along the outline to seat the adhesive, then power up and check that all legends and displays read clearly.

• Legends or icons have worn through at the most-used keys
• The film has yellowed or hazzed enough to soften the display contrast
• Edges have lifted and coolant has crept underneath
• The panel is being prepared for resale and the original surface needs to look clean

Single overlays and workshop stock are both supplied, packed in a carton with a rigid sleeve so the die-cut edge arrives flat, dispatched 3–10 days after payment, with T/T or L/C accepted. Send your machine model and the number on the existing overlay and our parts team will confirm the correct film before shipment.