W195 W200 W205 Tailgate Scraper Maintenance Kit 2172937 Scraper Blade for Road Milling

Wear-resistant scraper blade kit for the rear tailgate of the milling drum housing, with pre-drilled mounting pattern

• W195, W200 and W205 fitment — the mounting hole pattern matches the original tailgate assembly, so the blade bolts straight on.
• Wear-resistant steel blade — built for continuous abrasive contact with roughened milled surfaces rather than occasional use.
• Reinforced blade thickness — up to 10 mm section gives more wear life between replacements.
• Maintenance kit format — the blade arrives ready to fit, so the tailgate is not left open waiting for machining or drilling.
• Corrosion resistant finish — suited to wet and dusty conditions behind the drum.

• Debris is being left behind the machine instead of being cleared
• The blade edge has rounded or been ground back past the wear line
• Visible cracks or a bent blade profile after hitting an obstruction
• Material builds up on the blade face instead of being scraped away
• Track cleanliness has degraded noticeably over recent shifts

Replacing at the first sign keeps the cut track clean and protects the parts downstream from abrasive carry-over.

1. Park the machine, lower the drum and isolate the machine before working at the tailgate.
2. Clean the mounting face and note the blade orientation and shim arrangement before removal.
3. Remove the retaining bolts, withdraw the worn blade and inspect the mounting holes for elongation.
4. Seat the replacement, fit bolts finger-tight, align the edge parallel to the drum, then torque to specification.
5. Run the machine briefly and check that the blade tracks evenly without contact on the drum.

Scraper kits are supplied from stock with a minimum order of one kit, packed in a carton, dispatched 3–6 weeks after payment and payable by L/C or T/T. Because the lead time is longer than most consumables, buyers running continuous milling schedules typically hold one kit per machine as a buffer rather than waiting for a blade to fail.