Display Screen 4812113786 Replacement Panel Keeps Asphalt Paver CC3800 524 6200 242HF Working

Display Screen 4812113786 Replacement Panel Now Shipping For Asphalt Paver CC3800, 524, 6200 And 242HF

A replacement display screen for asphalt pavers is now available from stock under part number 4812113786. The panel fits CC3800, 524, 6200 and 242HF pavers and works as the operator interface for the leveling control system, showing sensor readings, set grade, and machine status, and converting keypad input into commands. Single unit orders are accepted, with a 7-10 day delivery window.

When A Screen Starts To Go

Screens rarely fail cleanly. In most fleets the decline runs through a whole season, and crews absorb it by working slower or correcting by hand before the part is finally swapped:

• Rows of pixels dropping out, or a backlight that fades under direct sun
• Keys that need a hard press, or that register twice
• The panel powers up but shows no sensor value
• Flicker or blanking on vibration, potholes, or track shock
• Moisture fogging behind the face after a rain shift or wash down

Every one of those symptoms costs paving hours quietly. The screen is the only place the operator can see what the leveling system is doing, so a weak panel turns grade control into guesswork long before the unit stops working altogether.

Fitting In One Maintenance Window

1. Switch off the machine and isolate the electrical system.
2. Photograph the connector layout and cable routing before removal.
3. Release the panel from its bracket and unplug the harness connectors.
4. Mount the replacement unit on the same bracket and reconnect the harness, checking that each plug locks.
5. Power up and confirm sensor values are shown and keypad input registers.
6. Run a short test pass on the leveling system before returning to full work.

No rewiring or bracket modification is needed, because the panel follows the original connector layout and fixing points. That keeps the swap inside a normal maintenance stop rather than a workshop visit.

Quick Fault Guide

Product Data

Ordering Terms

Matching The Panel Before Dispatch

Paver fleets often run a CC3800 next to 524 or 6200 units, and screens from different generations do not always interchange. Send the machine model, the part number on the old panel, and a photo of the connector side. The technical team checks the match before the unit leaves the warehouse, which is cheaper than a return from a job site.

For buyers sourcing a display screen 4812113786 replacement panel for asphalt paver CC3800, 524, 6200 and 242HF leveling systems, the unit is available from stock now with a one piece minimum. Contact the team for current pricing, availability, and compatibility checks on other paver models.