APOLLO Polyurethane Track Pad 2102696 2411111 Replacement Track Shoe for W1900 Road Milling Machine

On a W1900 milling machine, the track pads are the cheapest wear item on the undercarriage, yet they decide how the rest of it survives. Worn pads let steel shoes ride on the pavement, the chain starts to load unevenly, and the next thing on the repair list is a chain, a roller, or a drive sprocket. Replacing the pads on schedule costs a fraction of that. This is the simple argument behind the APOLLO polyurethane track pad 2102696 / 2411111: keep the wear in a part designed to wear, and keep the steel out of the surface.

Three pad types show up on milling machines, and they behave differently on hot asphalt:

Polyurethane keeps its hardness across a wider temperature band than rubber, so the pad does not go soft on a hot day and does not go brittle in a cold yard. That behaviour is what makes it reusable across several jobs instead of a consumable that is thrown away every few shifts.

1. Park on hard level ground and lower the machine so the track section to be serviced is slack.
2. Remove the worn pad bolts and keep the hardware in a tray; damaged bolts should not be reused.
3. Clean the chain link face of asphalt build up before fitting, so the new pad sits flat.
4. Fit the new pad, align the bolt holes, and torque in a cross pattern to the machine specification.
5. Run the track one full revolution and re check bolt torque before the machine goes back to work.

• Wash off asphalt residue while it is still warm, before it sets into the tread
• Check bolt torque after the first shift on a new set
• Rotate pads between positions to even out wear across the track
• Store spare pads flat and out of direct sun rather than stacked under load
• Replace a pad as soon as the steel insert shows through, not after the chain starts knocking

Confirm the machine model, the pad part number on the old shoe, and the bolt pattern. Fleet operators often run W1900 alongside other milling widths, and the pad lengths differ between models, so a photo of the old pad next to a ruler is the fastest way to confirm the match. APOLLO supplies road construction machinery parts only: track pads, sonic sensors, milling machine wear parts, and asphalt paver spares.

For buyers looking for an APOLLO Polyurethane Track Pad 2102696 2411111 Replacement Track Shoe for W1900 Road Milling Machine, the pad is available from stock with a one piece minimum and 7-10 day delivery. Contact APOLLO for pricing, wear part bundles, and compatibility checks on other milling machine models.

AI generated studio view

AI generated detail view