Apollo 101227 Three-Screen Depth Controller Film 2082170 Milling Sensor Stickers for W2000 W2100 Console

This overlay film set is a direct protection solution for the triple-screen depth controller and sensor panel used on W2000 and W2100 road milling machines. It covers the reference codes 101227 (three-screen depth controller film) and 2082170 (milling sensor sticker), together with the related references 2154440 and 2478077 used to identify console overlay sizes.

The console of a milling machine takes constant punishment: coolant mist, abrasive dust, metal chips, diesel spill and repeated cleaning with industrial solvents. Once the original overlay is scratched or stained, the depth readouts and function keys become hard to read, and operators start working by memory instead of by display. A fresh precision-cut film restores legibility for a fraction of the cost of a replacement control panel.

• Precision-cut geometry – die-cut to the three-screen console layout, with cut-outs for keys, indicator lights and data ports so every control stays accessible.
• UV-resistant film – stabilised polymer resists yellowing and embrittlement under workshop lighting and direct sun on outdoor sites.
• Bubble-free application – controlled-adhesion backing allows repositioning during fitment, so the film can be lifted and re-laid until it sits flat.
• Anti-glare surface – matte finish reduces reflection from work lights, keeping depth values readable in bright conditions.
• Chemical resistance – withstands routine cleaning with standard industrial solvents without clouding or lifting at the edges.
• Sensor sticker set included – matching 2082170 milling sensor stickers restore the labelling on sensor points at the same time as the console film.

The set is used when a milling machine console has lost legibility through wear, when a machine is being refurbished before resale, or when a rental fleet needs a consistent panel appearance across mixed machine ages. Because the film is applied on top of the existing panel, no wiring, reprogramming or console removal is involved.

Service technicians also use the film to protect a freshly installed console from day one, which is considerably cheaper than replacing a panel damaged by solvent attack or by picks and tools laid on the screen.

Clean the console with a mild detergent solution and let it dry completely; any dust left under the film becomes a visible bubble. Peel the backing from one edge, align the cut-outs with the keys and screens, and lay the film down progressively while smoothing with the supplied squeegee. If the position is wrong, lift the film and re-lay it – the controlled-adhesion backing allows repositioning before final pressure is applied.

Work the edges down firmly at the end so that dust and coolant cannot creep under the film. Sensor stickers should be applied to a clean, dry surface and pressed for a few seconds; avoid touching the adhesive side with fingers.

Films are shipped flat in a rigid carton with a protective sleeve to prevent creasing in transit, together with an application squeegee and fitting instructions. Delivery is 3 to 10 working days after payment, with larger orders scheduled on confirmation. Payment terms include T/T and L/C.

The 101227 three-screen depth controller film and 2082170 milling sensor sticker set restore console legibility on W2000 and W2100 milling machines in minutes, with UV-resistant, anti-glare material and a bubble-free application. It is the lowest-cost way to keep depth readouts clear and protect the control panel from daily solvent and abrasion damage.

Send your machine model, quantity and destination port and we will confirm price, lead time and freight cost the same working day.