APOLLO 2480135 Screed Connecting Cable Plug Harness Assembly for S1800-3i Asphalt Paver Spare Parts

APOLLO 2480135 Screed Connecting Cable with Plug for S1800-3i Asphalt Paver

The screed on an asphalt paver is not a passive attachment. It carries heating elements, sensors and control signals, all of which have to reach the main machine through a cable that runs across the tow arms and through the working joint between the two assemblies. The APOLLO 2480135 connecting cable is that link on the S1800-3i, supplied as a complete assembly with the plug fitted at the machine end.

Because the cable moves every time the screed is raised, extended or folded for transport, the conductor bundle and the plug are the parts that wear first. A cable that has been flexed thousands of times develops intermittent contact long before it fails completely, which shows up as flickering readings or functions that drop out only on certain paving widths.

Key Features

• Complete assembly with plug: supplied with the machine-end plug fitted, so no crimping or terminal work is required on site.
• Model specific routing length: dimensioned for the S1800-3i, so the cable follows the original routing without strain at the connectors.
• Flex resistant construction: the jacket and conductor bundle are built for repeated movement at the screed pivot.
• Stable signal transmission: maintains continuity for screed control and sensor signals under vibration and heat.
• Plug-in replacement: unplug the failed cable, route the new one along the same path and reconnect.

Product Specifications

Symptoms of a Failing Cable

Intermittent electrical faults on a paver are often blamed on the control unit before the cable is checked. A simple continuity test along the cable, with the screed moved through its full travel, usually settles the question in a few minutes.

• Functions that drop out only when the screed is extended or folded.
• Sensor readings that jump or freeze and recover after the machine is restarted.
• Cracked jacket, exposed conductor or corrosion at the plug pins.
• Fault codes that clear when the connector is wiggled.

Ordering Information

Please confirm the machine model S1800-3i together with part number 2480135 when sending an inquiry. Single piece orders are accepted. Photos of the original cable, especially the plug and any label, are welcome and will be checked against stock before shipment. Contact our sales team for current pricing and lead time.