LCD Display Plus Circuit Board Assembly 2052116 Added for Asphalt Paver Sidebox Panels

LCD Display Plus Circuit Board Assembly 2052116 Added for Asphalt Paver Sidebox Panels

We have added the LCD display plus circuit board assembly, part number 2052116, to our asphalt paver spare parts range. It is a complete panel module: the monochrome LCD screen, its backlight and the drive electronics on one board, matched and tested as a single unit for the sidebox control panel of asphalt paver electronic systems.

Why the Display Module Fails First

The sidebox panel is the operator's window into the machine. It shows the paving parameters that were entered, the machine status and the fault codes that decide whether paving continues or stops. On a paver, that panel lives in one of the harshest places on the job site: direct sun, hot mix radiant heat, constant vibration, dust and daily washdown.

When the display starts to fail, the symptoms are consistent and easy to recognise:

• The screen goes dark or the backlight drops out intermittently, especially after the machine has been working in the heat of the day.
• Segments or whole lines disappear, so parameters can only be guessed at.
• The panel flickers or the readout jumps while the machine is moving.
• Key presses stop registering, or the panel freezes and needs a power cycle.

In most of these cases the fault sits in the board behind the glass, not in the machine harness. Replacing the complete assembly instead of chasing individual components on a roadside repair restores the interface in one step.

Key Benefits of the Complete Assembly

• Matched display and electronics — screen, backlight and drive circuitry are supplied together and tested as a unit, so there is no compatibility guesswork.
• Plug-in replacement — connector layout and mounting points follow the original sidebox panel, keeping downtime to the time it takes to swap the module.
• Stable under paving conditions — designed to hold display performance against vibration, temperature swings, dust and moisture around the console.
• Readable in real working light — consistent contrast and backlight so parameters can be read in direct sunlight and after dark.
• Durable board construction — quality PCB and components for consistent electrical behaviour and a long service interval.

Technical Specifications

When Contractors Buy This Module

Three situations account for most orders. First, a machine that has stopped mid job because the operator can no longer read or enter parameters: the assembly is fitted on site and paving restarts the same day. Second, planned overhaul, where a panel with a fading backlight is replaced before it fails. Third, fleet stock: paving and rental fleets hold one module because a dark panel stops the machine just as effectively as a mechanical failure, and a module is far cheaper than a lost shift.

Fitting Notes

1. Record the current machine parameters before removing the old panel.
2. Switch off the machine and isolate the control circuit.
3. Keep the new assembly in its anti-static bag until the moment of fitting and handle it by the board edges.
4. Release the panel fixings, unplug the harness, and transfer the module onto the same mounting points.
5. Reconnect the harness, power up and confirm that all segments, backlight and keys respond before returning to work.

Availability and Ordering

Stock is available now, and combined orders with other paver electrical and mechanical spare parts can be consolidated into one shipment to reduce freight cost. Send us the part number on the old module, your machine model and your destination port, and we will confirm price, packing and the fastest shipping option available.