APOLLO 85010902 Tool Holder Back in Stock to Cut Milling Drum Downtime on BM2000 Machines

APOLLO 85010902 Tool Holder Now in Stock for BM2000 Road Milling Drum Repairs

A new batch of the APOLLO 85010902 tool holder is available for BM2000 road milling machines, giving milling crews and drum repair workshops a reliable steel holder for planned refurbishment and unplanned breakdowns. The part is supplied 100% new from Japan and is produced as a direct replacement for the holder that carries the cutting pick on the milling drum, so a worn drum can be rebuilt to its original cutting geometry without modifying the drum body.

Why the Holder Decides Pick Life and Milling Quality

The holder is the interface between the drum and the pick. Once its seat opens up or the retaining ring groove wears, the pick starts to chatter in the bore, the carbide tip breaks early and the drum begins to smear the surface rather than cut it cleanly. Replacing picks without replacing worn holders simply repeats the same failure on the next set. The 85010902 is built to hold the pick at the correct rotational position and depth, which brings four practical benefits:

• Durable steel body: resists impact and abrasion at the drum face during asphalt and concrete milling campaigns.
• Accurate pick seat: machined to nominal size, 20 mm seat diameter, so the pick sits square to the cut and milling depth stays even.
• Secure retaining groove: cut to specification so the retaining ring locks the pick without movement that would enlarge the bore.
• Straightforward replacement: the holder can be cut out and re-welded using standard drum repair practice, restoring the drum without replacing it.

Technical Specifications

Where the Holder Is Used

Road milling and cold planing of asphalt and concrete pavement, highway and municipal rehabilitation, trench and utility cutting, surface texturing, and drum refurbishment workshops. In practice, holders are replaced in sets when a drum is rebuilt, because wear is rarely limited to one position and a mixed-age drum tends to produce an uneven cutting pattern.

Commercial Terms and Delivery

Holders are packed with internal separation so the seat and retaining groove arrive undamaged, and every lot is checked for seat diameter, hardness and weld face condition before dispatch. Monthly capacity of 10,000 pieces supports both workshop consumption and distributor stock programmes.

Ordering Support

Our spare parts team confirms the machine model and part number against your drum photograph before shipping, so the correct holder arrives the first time. Send the drum layout photo, machine model and required quantity and we will come back with a quotation and a delivery schedule within one working day.

Contact our sales team today for pricing, stock availability and combined shipping on road milling machine spare parts.