APOLLO 2053061 Elbow Support Bracket for W195 W205 W215 Milling Machines Now in Stock

Milling machine owners running W195, W205 and W215 machines can now replenish one of the small parts that causes outsized downtime: the APOLLO 2053061 elbow support bracket is available from stock for single piece and stock orders.

Hydraulic and lubrication circuits on a milling machine snake through the frame and change direction at elbow joints. Each bend has to be anchored, otherwise the tube vibrates against the machine structure every time the pump loads up. That vibration is transferred straight into the fitting thread, and a fitting that moves will eventually weep, then drip, then fail.

The 2053061 bracket is the anchor. It clamps the elbow at the factory stand-off and bolts to the existing frame points, so the tube stays rigid and the joint keeps its seal. When the bracket is cracked, bent or corroded through, the tube starts to float and the leak usually shows up at the elbow rather than at the bracket itself.

• Model specific fitment: dimensioned for W195, W205 and W215 road milling machines, with mounting holes matching the original positions.
• Vibration control: rigid clamping prevents tube flex and protects the fitting thread from fatigue.
• Corrosion resistant build: heavy-duty steel with surface treatment for dust, water and hydraulic oil exposure.
• Bolt-on replacement: no welding and no pipe removal, so the part can be changed during routine service.
• Genuine APOLLO spare: produced to original specification for repeatable fit and service life.

Because the bracket is inexpensive compared with the consequences of a burst line, many workshops simply replace it whenever the surrounding pipework is opened. The points worth checking on inspection are the clamp radius, the bolt hole spacing and the angle of the bend seat, all of which follow the original dimensions on this part.

• Cracks at the bend of the bracket body.
• Elongated or corroded mounting holes.
• Tube that can be rocked by hand at the elbow.
• Oil residue or damp dust collecting around the fitting.

Each bracket is packed in a box or carton with protective packing for export. Minimum order quantity is one piece, which suits a single repair as well as a workshop stocking programme. Payment terms include T/T, L/C and Western Union, with delivery normally five to ten days after payment.

Please quote the machine model (W195, W205 or W215) together with part number 2053061 when ordering. Photos of the original bracket are welcome and will be checked against stock before shipment.

For pricing, lead time and combined orders of milling machine spare parts, please contact:

Umi

Tel/WhatsApp: +81 90-2067-6888

Email: apollo5@jpapollo.com