APOLLO Adds Polyurethane Track Pad 2102696 2411111 for W1900 Road Milling Machine Undercarriage

APOLLO has added the polyurethane track pad 2102696 / 2411111 to its stocked range of road construction machinery parts. The pad is a bolt on replacement track shoe for the W1900 road milling machine undercarriage, supplied in 100% new condition with a minimum order quantity of one piece and 7-10 day delivery.

The track pads are the cheapest wear item on a milling machine, but they control how long everything above them lasts. Once the polyurethane wears through and steel shoes start riding on the pavement, the load moves into the chain, rollers, and drive sprocket. Replacing pads on schedule keeps the wear inside a part that is designed to wear out, which is a small fraction of the cost of a chain or final drive repair.

Polyurethane also behaves differently from rubber on a hot surface. It holds its hardness at asphalt temperature instead of going soft in the afternoon heat, and it does not go brittle in a cold yard. That is what lets a set of pads serve several jobs rather than being treated as a consumable.

1. Park on hard level ground and lower the machine so the track section is slack.
2. Remove the worn pad bolts and discard any bolt with damaged threads.
3. Clean the chain link face free of asphalt build up so the new pad sits flat.
4. Fit the pad, align the bolt holes, and torque in a cross pattern to machine specification.
5. Run one full track revolution and re check torque before returning to work.

• Wash off asphalt residue while it is still warm, before it sets into the tread
• Re check bolt torque after the first shift on a new set
• Rotate pads between positions so wear stays even across the track
• Store spare pads flat and out of direct sun, not stacked under load
• Replace a pad when the steel insert appears, not when the chain starts knocking

Fleet operators often run the W1900 alongside other milling widths, and pad lengths differ between models. Before ordering, confirm the machine model, the part number on the old pad, and the bolt pattern, or send a photo of the old pad next to a ruler. The technical team checks the match before dispatch.

APOLLO supplies road construction machinery parts only: track pads, sonic sensors, milling machine wear parts, and asphalt paver spares. For buyers sourcing an APOLLO polyurethane track pad 2102696 2411111 replacement track shoe for the W1900 road milling machine, the pad is available from stock now. Contact APOLLO for pricing, wear part bundles, and compatibility checks on other milling machine models.