Paverspareparts Adds TYP11 Leveling Sensor 14317390 With 6 Pin Screw Thread Connector To Paver Parts Range

Paverspareparts Stocks The TYP11 Leveling Sensor 14317390 For Asphalt Paver Grade Control

Paverspareparts has added the TYP11 leveling sensor, part number 14317390, to its stocked range of asphalt paver leveling components. The unit is supplied with a 6 pin screw thread connector and is available now with a minimum order quantity of one piece, so a crew that loses grade control mid contract can replace the sensor without waiting on a factory lead time.

Leveling electronics are the part of a paver that decides whether a mat is accepted. When the sensor signal drifts or drops out, the result is visible immediately: thickness variation, longitudinal waves and joints that will not match. Every hour the paver stays down on a resurfacing contract costs far more than the sensor itself, which is why contractors keep a spare on the truck and why this part now sits in our stock.

What The TYP11 Sensor Does On The Screed

The TYP11 is a leveling sensor mounted on the screed arm of an asphalt paver. It reads the reference the crew is working to — a tensioned stringline, the existing surface or a curb — and sends continuous height information to the leveling control. The control then corrects screed height and cross slope in real time, holding mat thickness and profile without the operator constantly adjusting the tow point.

The 6 pin screw thread connector is the detail that matters in daily use. Push fit plugs work loose under screed vibration and admit water during cleaning, and both faults show up as intermittent signals that are hard to diagnose on site. A threaded coupling locks the connection, so the electrical path stays stable shift after shift.

Key Benefits For Paving Crews

• Stable grade and slope: continuous feedback holds mat thickness and cross slope so smoothness checks pass on the first attempt.
• Vibration proof connection: the 6 pin screw thread coupling removes the intermittent faults typical of push fit connectors on hot screeds.
• Direct part number match: built to 14317390 and mounts on the original bracket, with no drilling or adapter plates.
• Site ready housing: a sealed plastic, steel and metal body resists dust, radiant heat from the mat and constant vibration.
• Short downtime: one sensor and one connector, and the paver is back on grade within the same shift.

Specification Summary

Where It Is Used

The sensor suits any paver leveling system that takes the TYP11 unit with the threaded 6 pin connector, including highway base and surface courses, urban road resurfacing, industrial yard and port paving, airport aprons and municipal maintenance work. It is also a sensible spare for mixed fleets, because a failed leveling sensor stops the paver as effectively as a mechanical failure.

Stock, Pricing And Delivery

About Paverspareparts

Based in Suzhou, China, Paverspareparts supplies spare parts for highway engineering machinery, with a focus on asphalt paver leveling systems, sensors, display screens, deflectors and wear components. The company serves road contractors, equipment dealers and fleet operators in Europe, the Middle East, Southeast Asia and the Americas, and verifies part numbers with customers before shipment so the correct component arrives the first time.

Order Inquiries

To order the TYP11 leveling sensor 14317390 or to confirm fitment, send your machine model, the part number being replaced and the connector type on your harness. Our team replies with stock status, packing options and shipping cost the same working day, and can combine spare parts into a single consolidated shipment.