APOLLO 108756 Poly Track Pad Kit Now Stocked for W1500 W1900 Road Milling Machines

Suzhou, China – Paverspareparts has added the APOLLO 108756 poly track pad kit to its stocked range of road milling machine undercarriage parts. The kit combines the polyurethane track pads with the complete steel track chain assembly – links, pins, bushings and pad fasteners – as a single pre-assembled unit for W1500 and W1900 milling machines. Stock is available from one kit, with delivery quoted at one to two weeks after payment.

Why a matched kit beats piece-by-piece repair

Most undercarriage failures on a milling machine are not single-part failures. Polyurethane pads wear thin, the track sits lower on the chain, and the load transfers to pins and bushings that were already near the end of their life. Replace only the pads and the stretched chain pulls the new pads out of alignment within a few hundred hours. The 108756 kit avoids that cycle because pad hole patterns, chain pitch and tension are matched at assembly, not improvised in the workshop.

Five signals that the track kit is due

• Track height loss: the machine sits visibly lower on one side, or the drum depth reading drifts away from the set value.
• Pad wear: pad thickness falls below the service limit, or bolt heads begin to sit proud of the pad surface.
• Chain stretch: track tension needs repeated adjustment inside a short working period.
• Noise and vibration: metallic knocking from the undercarriage as pins and bushings wear through.
• Loose or missing pads: elongated bolt holes, cracked pad edges, or fasteners lost to site damage.

When two or more of these appear together, replacing the pads alone usually brings the machine back to the workshop within a month. A matched kit is the cheaper decision measured against two downtime events.

What is in the kit

Each kit contains the polyurethane track pads and the steel chain assembly with links, pins and bushings, assembled to the original layout for W1500 and W1900 machines. The pad body is abrasion resistant, protecting the milled surface and the chain during milling and travelling, while the steel chain carries the drive load to the sprocket. Because small hardware is included, the workshop does not need to source pins or fasteners separately before scheduling the job.

Technical specifications

Ordering and shipping

Before ordering, confirm the machine model and the number of track assemblies required per machine – a milling machine normally needs one kit per side. Kits ship on pallets and can be consolidated with drum teeth, conveyor chains, water pump parts or hydraulic components in a single container, which lowers the freight cost per kit for fleet operators and rental companies maintaining several machines.

About Paverspareparts

Founded in 2018, Suzhou Bainite Machinery Technology Co., Ltd. designs, produces and exports spare parts for highway engineering machinery and equipment. The customer base covers highway construction contractors, rental fleets and direct end users, with 80 to 90 percent of output exported. The catalogue includes asphalt paver, milling machine and road roller components, supported by engineers who cross-reference OEM part numbers for customers.

For a quotation, fitment confirmation or consolidated shipping plan, contact the Paverspareparts sales team through the enquiry form on the website.