Apollo Rubber Track Pad 4812235774 for F141C Asphalt Pavers Now Available from Factory

Apollo Rubber Track Pad 4812235774 for F141C Pavers Now in Stock

We have expanded our undercarriage parts line with the Apollo rubber track pad, part number 4812235774, for F141C asphalt pavers. The pad is an integrated track shoe: a wear resistant rubber block vulcanized onto a steel backing plate, bolted directly to the crawler chain without adapters or spacers.

Track pads are a consumable, and they are usually replaced long before the chain and rollers reach the end of their life. Choosing a pad that holds its height and tread pattern keeps the crawler geometry stable and protects the more expensive components around it.

What the 4812235774 Pad Does for a Paver

On a paver, the undercarriage carries the machine while the screed is towed behind. Any vibration or track height variation transfers into paving smoothness. The 4812235774 pad is designed for that duty:

• Wear resistant rubber compound that resists abrasion from aggregate, hot asphalt and grit.
• Steel backing plate vulcanized to the rubber block to prevent delamination under load.
• Integrated track shoe design that bolts straight onto the crawler chain of the F141C.
• Shock absorption that reduces vibration transferred to the screed and machine frame.
• Textured tread pattern for traction on slopes, soft base courses and milled surfaces.
• Replacement wear part that cuts maintenance downtime and keeps the paver on schedule.

Technical Specifications

When to Replace Track Pads

Three signs usually mean the pads are due for replacement. First, the rubber height drops noticeably against a new pad, which changes track pitch and loads the chain pins unevenly. Second, the tread pattern is worn flat, so the machine slips on slopes or wet base courses. Third, cracking appears at the edge of the rubber block or the bond line with the steel plate, which is the point where a pad can separate completely on site. Replacing pads at the first of these signs is far cheaper than replacing chain, rollers and drive sprockets later.

Packing, MOQ and Delivery

Minimum order quantity is 1 piece, with reference pricing from USD 30 to 36 per piece depending on quantity. Pads are packed in cartons on pallets, and neutral packing is available for container shipments. Stock is normally shipped in 7 to 10 days, and mixed orders with milling picks, conveyor chains and other Apollo paver wear parts can be consolidated into one shipment to reduce freight cost.

Next Step

If your F141C paver is due for an undercarriage refresh, send us the machine serial number, the number of pads required and your destination port. Our parts team will confirm the 4812235774 fitment, prepare a quotation and propose a shipping plan that matches your maintenance window.

Contact: Umi

Email: apollo5@jpapollo.com