APOLLO 130245 Power Cable Now Available for W2200CR Main Console Replacement

APOLLO 130245 Power Cable Restocked for W2200CR Main Console Service Work

We have released a dedicated service-part listing for the APOLLO 130245 power cable, the 4-metre replacement cord built for the W2200CR main console electrical system. The part is stocked for single-piece orders with a 7-10 day lead time, so contractors and maintenance teams can restore a console without waiting on long factory backorders.

The 130245 cord is a direct-fit item rather than a generic length of cable. Both ends carry a matched 10-pin to 10-hole connector pair, which means the operator does not need to cut, splice or adapt anything on site. Plug in, secure the connector heads, and the console is back on power.

Why the W2200CR Console Cable Fails in the Field

Power cords on asphalt pavers and road milling machines take a specific kind of abuse. The console is opened and closed every shift, the cable is bent around the machine frame, and it sits in dust, vibration and wide temperature swings. Three failure patterns show up again and again:

• Conductor fatigue near the connector head. Repeated bending concentrates stress at the point where the wire enters the plug, and strands begin to break one by one.
• Loose pin contact. A worn plug fits loosely in the socket, resistance rises, and the console starts dropping out intermittently or arcing under load.
• Sheath abrasion. Chafing against metal edges exposes the inner conductors, which is both a reliability and a safety problem.

The APOLLO 130245 addresses all three: reinforced connector heads act as built-in strain relief, the 10-pin layout is aligned and continuity-tested before packing, and the outer sheath is specified for repeated handling and bending rather than fixed installation.

Technical Specification

Ordering and Stock Policy

Monthly supply capacity is 1000 pieces, which covers both single-unit service demand and fleet-level preventive replacement programmes. Payment is accepted by L/C or T/T, and goods ship in export cartons by air or sea freight according to the destination.

For fleets, the practical recommendation is to keep one spare cord per machine plus one shared spare for the shift crew. Cable failure is rarely planned: it usually shows up at the start of a paving window, when the machine has to be on grade and the console has to power up on the first attempt.

Replacement Notes for Technicians

• Confirm the console model is W2200CR before ordering; the 130245 is built to this pin layout only.
• Isolate the electrical system before removing the old cord.
• Check the socket for bent pins or corrosion while the old cable is out; a damaged socket will wear a new plug prematurely.
• Route the 4M length along the original cable path and leave a service loop at the console end instead of a tight bend.
• Power up and verify all ten channels before returning the machine to work.

Availability

The APOLLO 130245 is available now for immediate order. Send your machine model, required quantity and destination port, and we will confirm stock, freight cost and shipment date the same working day.